Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants

In this study, chemiluminescence (CL) behaviour of Luminol-H₂O₂ in the presence of the different concentrations of four surfactants, cetyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), sodium dodecyl sulphate (SDS) and polyoxyethylene dodecyl ether (Brij-35), was investigated. A novel method for the direct determination of critical micelle concentration (CMC) of the surfactants using flow-injection CL is described. Under the optimum conditions, the luminescence intensity of the Luminol-H₂O₂ system increased gradually with increasing concentration of the surfactants before the CMC, but rapidly reached to the emission maximum at the CMC, followed by a decrease after the CMC. The concentrations of the surfactants corresponding to the luminescence maximum are in agreement with the literature CMC values. The main factors affecting the determination of CMC are discussed. The mechanistic studies show that the luminescence peaks observed in the experiment were mainly because of the protective effect of the micelle against the transition of the excited species and the retarding effect of the micelle structures on the CL reaction rate.     

Tuning of the Temperature Window for Unit‐Cell and Pore‐Size Enlargement in Face‐Centered‐Cubic Large‐Mesopore Silicas Templated by Swollen Block Copolymer Micelles

The unit‐cell size and pore diameter as functions of temperature are investigated in the syntheses of FDU‐12 silicas with face‐centered cubic structure templated by Pluronic (PEO‐PPO‐PEO) block copolymer micelles swollen by toluene. The temperature range in which the unit‐cell size and pore size strongly increase as temperature decreases is correlated with the critical micelle temperature (CMT) of the surfactant. While Pluronic F127 affords a wide range of unit‐cell parameters (28–51 nm) and pore diameters (16–32 nm), it renders moderately enlarged pore sizes at 25 °C. The use of Pluronic F108 with higher CMT affords FDU‐12 with very large unit‐cell size (～49 nm) and large pore diameter (27 nm) at 23 °C. Large unit‐cell size (40–41 nm) and pore size (22 nm) were obtained even at 25 °C. The application of Pluronics F87 and F88 with much smaller molecular weights and higher CMTs also allows one to synthesize FDU‐12 with quite large unit‐cell parameters and pore sizes at room temperature. The present work demonstrates that one can judiciously select Pluronic surfactants with appropriate CMT to shift the temperature range in which the pore diameter is readily tunable.     

局部载荷作用简支板屈曲分析

根据能量原理,引入大挠度Von-Karman方程,求解了应力不连续简支板的屈曲问题,得到了临界载荷和临界应力计算系数.     

Dynamic Stability of a Fluid-Coveying Cantilevered Pipe on an Additional Combined Support

Based on an analytical study, a numerical analysis is made of the dynamic stability of a cantilevered steel pipe conveying a fluid. The pipe is modeled by a beam restrained at the left end and supported by a special device (a rotational elastic restraint plus a Q-apparatus) at the right end. The numerical analysis reveals that the critical velocity of the fluid depends on the governing parameters of the problem such as the ratio of the fluid mass to the pipe mass per unit length and the rotational elastic constant at the right end     

自紧身管临界裂纹尺寸的概率断裂力学研究

基于概率断裂力学理论和Mome Caflo模拟方法，本文进行了自紧身管临界裂纹尺寸的可靠性研究。自紧身管内表面的疲劳裂纹考虑为半椭圆形式。裂纹尖端处的应力强度因子由内压和自紧残余应力共同产生。自紧残余应力采用了符合身管材料具有强化和包辛格效应性能推导的公式计算，它产生的应力强度因子通过权函数方法得到。根据断裂准则，可计算出自紧身管的临界裂纹尺寸。实例分析表明，对数正态分布为临界裂纹尺寸的最佳分布，同时给出了在各种置信度和可靠度下自紧身管的临界裂纹尺寸。     

Two-dimensional stability problem for two interacting short fibers in a composite: In-line arrangement

A solution is found to a plane problem for a composite material reinforced with two in-line fibers and subjected to longitudinal compression. The problem formulation is based on the piecewise-homogeneous model and the three-dimensional theory of stability. The dependence of the critical strain and buckling mode on the distance between the fibers is studied for various mechanical and geometrical characteristics of the composite components.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 65–74, September 2004.     

临界空穴扩张比准则的适用性

用新研制成的DE36平台钢制的轴对称和平面应变试样,进一步考察了临界空穴扩张比V_(Gi)准则[1]、[2]、[3]的适用性。实验和大应变有限元理论计算结果表明,V_(Gi)准则适用于所研究材料。文中指出,按V_(Gi)准则可根据试样或构件材料中V_G的发展变化来预起裂位置。     

长方体的热爆炸临界参数估计

本文给出了各侧面散热条件不同情况下的长方体反应系统临界F-K点火参数估计公式,并用已有的研究结果做了比较,表明该公式给出了较好的临界参数估计值。     

Critical Reynolds number in plasma flows on a stabilized plasmatron section

A technique for determining the criterion of transition from the laminar to the turbulent flow regime on a stabilized plasmatron channel section is proposed. The technique uses experimental data and the methods of numerical simulation of plasma flows. A criterial generalization of the experimental data which for the first time makes it possible to establish the boundary of transition from the laminar to the turbulent flow regime on a stabilized plasmatron channel section is proposed. The experimental results are in good agreement with the theoretical dependences derived in the study. A curve (analog of the neutral curve) separating the domains of existence of laminar and turbulent plasma flows in a cylindrical channel is constructed in the space of the plasmatron working parameters.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 5, 2004, pp. 49–61. Original Russian Text Copyright © 2004 by Sinkevich and Chikunov.     

硅微陀螺梳齿驱动的面内失准分析

静电梳齿微驱动器因其结构简单、功耗低、灵敏度高、受温度影响小，成为硅微陀螺仪的主要驱动方式。静电梳齿微驱动器通常由活动梳齿和固定梳齿组成。理想情况下，活动梳齿平行地位于两固定梳齿中心位置。但由于加工误差、驱动结构不对称、扰动等因素，使得活动梳齿相对固定梳齿发生偏转。该文应用能量法及虚功原理，建立了梳齿之间的力与力矩平衡方程。得出了非理想情况下，偏离距离和转角的解析表达式，并分析得出了梳齿间的临界电压。经过数值仿真发现，梳齿面内既偏转又转动时的临界电压小于只发生偏转或转动时的临界电压。